Licensed & Insured

Why Does My Outdoor GFCI Keep Tripping?

Outdoor outlets, porch circuits, and landscape lights, any time of year

All electrical articles

An outdoor GFCI that keeps tripping is doing its job: it shuts off power when it senses current leaving its intended path. The useful question is why. This guide covers outdoor outlets, porch and patio circuits, and landscape lighting year-round. If the trouble only started with holiday decorations, our Christmas lights tripping the breaker guide is the better starting point.

What a GFCI does outdoors

A ground-fault circuit interrupter (GFCI) compares the current going out on a circuit with the current coming back. When they do not match closely enough, it cuts power quickly to help protect people from shock. Outdoor outlets are a common place for this protection because they are near damp ground, rain, and hoses.

The protection may be in the outlet you are using, in another outlet upstream on the same circuit (sometimes in a garage, bathroom, or basement), or in a breaker in the panel. One GFCI can protect several outlets, so a dead porch outlet may be reset somewhere else entirely.

Common reasons an outdoor GFCI keeps tripping

  • Water in an outlet box, cover, or cord connection after rain or sprinklers
  • A damaged outdoor cord, light set, pump, or tool plugged into the outlet
  • Worn or cracked outdoor fixtures and landscape lighting connections
  • An outlet cover that does not close fully with a cord plugged in
  • Damaged wiring or a failing device somewhere on the protected circuit

A trip that happens only during or after wet weather points toward moisture getting where it should not. A trip that happens the moment one item is plugged in points toward that item. A trip with nothing plugged in points toward the circuit itself, which needs an electrician.

Safe observations you can make

You can gather useful details without opening anything. Stay off wet ground near electrical equipment, and never handle cords, plugs, or outlets while they or your hands are wet.

  • Note the time, the weather, and what was plugged in when it tripped
  • Unplug everything from the protected outlets, then press RESET once
  • If it holds, plug in one dry, undamaged item at a time and note which one trips it
  • Look for an outlet cover that is cracked, missing, or will not close over a plug
  • Check whether other outlets, lights, or rooms lost power at the same time

If the GFCI will not reset, trips again with nothing plugged in, feels warm, smells hot, or shows scorch marks, stop resetting it. Leave it off and call an electrician. If there is smoke or fire, get away from it and call 911.

What not to do

Do not replace a GFCI outlet with a standard one, swap it for a different device, or run an extension cord from an unprotected indoor outlet to keep outdoor equipment running. Do not open outlet boxes or remove covers while the circuit could be energized. The GFCI is the part of the system that noticed a problem; removing it only removes the warning.

Pressing TEST and then RESET is a normal monthly check on most GFCI outlets. Repeatedly resetting a device that keeps tripping is not a fix.

When to call an electrician

Call when the trip continues with nothing plugged in, when it happens every time it rains, when an outlet or cover is damaged, or when you cannot find which GFCI protects the outlet. An electrician can safely test the circuit, check outdoor boxes and covers, and find damaged wiring or a failing device.

If you keep running cords across the yard, a properly placed and protected outdoor outlet may be the better long-term answer. Read our dead outlet or tripping breaker guide for indoor symptoms, see our electrical services, or contact Walker Electrical Services to have the circuit checked.

Additional reading: ESFI home electrical safety .